Tuesday, October 13, 2009

Using ADORDD with Harbour/xHarbour

Using Delphi 5 and subsequently Delphi 7, I have been using ADO to connect to databases such as MS/SQL and MySql without much issues. So in my exploration of Harbour, I note with interest that one can connect to various databases via ADORdd

Apparently Antonio Linares announce the availability of AdoRDD on 26 April 2007 and since then there have been 169 follow-up posts. There has also been some discussions on AdoRDD in the Harbour Main Developers List as well

This is what Antonio Linares posted quoted verbatim


New AdoRDD (free)

FiveTech Software and noway www.noway.com are proud to announce the availability of an early release of the ADORDD for Harbour and xHarbour. This RDD is planned to be included in the Harbour CVS so we welcome all ADO users to start testing it and colaborating in its development.

Actually this code is already working:

REQUEST ADORDD

FUNCTION Main()

USE test.mdb VIA "ADORDD"

BROWSE()

USE

RETURN nil

It has already been tested with Access and MySQL, but it should work with any DataBase engine that supports ADO.

best regards,

www.ViaOpen.com

noway www.noway.com
Fernando Mancera (Updated 20/1/2010)

Last edited by Antonio Linares on Thu May 03, 2007 11:20 am, edited 1 time in total.
regards, saludos

Antonio Linares
www.fivetechsoft.com

2 comments:

  1. Hi CCH,

    Thanks a lot :)

    I used ADORDD both with HMG and HMG Extended. And heard some compatiblity issue also in HMG Forum.

    What it the difference between existing ADORDD and ADORDD created by Fivetech and Noway.

    BTW, I tried to go to noway web site. But, found problem.

    With best regards.

    Sudip

    ReplyDelete
  2. Hello CCH,

    please change Noway by www.ViaOpen.com, and Fernando Sanchez by Fernando Mancera, the original autor of ADORDD. You can see the copyright on adordd.prg

    ReplyDelete

Welcome to Clipper... Clipper... Clipper


In 1997, then using Delphi 3, I had already created 32-bits Windows applications for HRIS, ERP and CRM. In 2007, using Ruby on Rails, an AJAX powered CRM site running on Apache & MySQL was created and I am now using Visual Studio .Net 2008 to create web-based projects and Delphi 7 for Win32 applications using SQL2005 & DBFCDX.

So, why then am I reviving the Original Clipper... Clipper... Clipper via a Blog as CA-Clipper is a programming language for the DOS world ? Believe it or not, there are still some clients using my mission-critical CA-Clipper applications for DOS installed in the late 80's and up to the mid 90's. This is testimony to CA-Clipper's robustness as a language :-)

With the widespread introduction of Windows 7 64-bits as the standard O/S for new Windows based PCs & Notebooks, CA-Clipper EXE simply will not work and it has become imperative for Clipper programmers to migrate immediately to Harbour to build 32/64 bits EXEs

Since 28th January 2009, this blog has been read by 134,389 (10/3/11 - 39,277) unique visitors (of which 45,151 (10/3/11 - 13,929) are returning visitors) from 103 countries and 1,574 cities & towns in Europe (37; 764 cities), North America (3; 373 cities) , Central America & Caribeans (6; 13 cities), South America(10; 226 cities), Africa & Middle-East (12; 44 cities) , Asia-Pacific (21; 175 cities). So, obviously Clipper is Alive & Well : -)


TIA & Enjoy ! (10th October 2012, 11:05; 13th November 2015)


Original Welcome Page for Clipper... Clipper... Clipper

This is the original Welcome Page for Clipper... Clipper... Clipper, which I am republishing for historical and sentimental reasons. The only changes that I have made was to fix all the broken links. BTW, the counter from counter.digits.com is still working :-)

Welcome to Chee Chong Hwa's Malaysian WWW web site which is dedicated to Clipperheads throughout the world.

This site started out as a teeny-weeny section of Who the heck is Chee Chong Hwa ? and has graduated into a full blown web site of more than 140 pages (actually hundreds of A4 size pages) ! This is due to its growing popularity and tremendous encouragements from visiting Clipperheads from 100 countries worldwide, from North America, Central America, Caribbean, South America, Europe, Middle-East, Africa and Asia-Pacific. Thanx Clipperheads, you all made this happen !


What is Clipper ?

You may ask, what is this Clipper stuff ? Could Clipper be something to do with sailing as it is the name of a very fast sailing American ship in the 19th century ?

Well, Clipper or to be precise, CA-Clipper is the premier PC-Software development tool for DOS. It was first developed by Nantucket Corporation initially as a compiler for dBase3+ programs. Since then, CA-Clipper has evolved away from its x-base roots with the introduction of lexical scoping & pre-defined objects like TBrowse. As at today, the most stable version ofClipper is 5.2e while the latest version, 5.3a was introduced on 21 May 1996.

As at 11th November, 1996, an unofficial 5.3a fixes file was made available by Jo French. See the About CA-Clipper 5.3a section for more details. BTW, Jo French uploaded the revised 5.3a fixes file on 20th November, 1996.

Latest News

The latest news is that CA has finally released the long-awaited 5.3b patch on 21 May, 1997.

For 5.3b users, you must a take a look at Jo French's comments on unfixed bugs in 5.3b.

BTW, have you used Click ? If you're a serious Clipperprogrammer and need an excellent code formatter, Click is a natural choice. How to get it ? Simple, access Phil Barnett's site via my Cool Clipper Sites.

32-bits Clipper for Windows ?

Have you tried Xbase ++ ? Well, I have and compared to Delphi (my current Windows programming tool of choice), I'm still sticking to Delphi.

Anyway, you should visit the Alaska Home Page. Give it a chance and then draw your own conclusions !.

The Harbour Project

Is this the future of Xbase ? Take a look at at the Harbour Project

You are Visitor # ...

According to counter.digits.com, you are visitor since 3 June 1996.

If you like or dislike what you see on this website, please drop me a line by clicking the email button at the bottom of this page or better still, by filling out the form in my guest book. If you are not sure what to write,click here to take a look at what other Clipperheads have to say.